Browse
 
Tools
Rss Categories

aarec.cfg

Reference Number: AA-02245 Views: 458 0 Rating/ Voters

Audio Acquisition Recorder (AAREC) Configuration:


The aarec.cfg file in the installation folder contains application configuration settings for the Audio Acquisition Recorder. The following configuration settings can be applied by editing this file, then restarting the service.

The default configurations of aarec.cfg can be also taken as they are if the service will be running on the local machine.


recording_host

Description: This is the local IP address on the Audio Recorder server that will be used to receive connections from the Audio Acquisition Server (AASVR) and should correspond to the value of report_host assigned in aasrv.cfg

Possible Values: This must be a valid local IP address. We recommend not using the loopback (127.0.0.1) address here, and instead use the actual assigned local IP address for the machine.

Default Value: 127.0.0.1


recording_port

Description: This is the port used to listen to connections from the Audio Acquisition Server (AASVR) and should correspond to the value of report_port assigned in aasrv.cfg

Possible Values: A valid port number.

Default Value: 15000


incoming_host

Description: This is the local IP address associated with the TCP listener for incoming VTS requests - required

Possible Values: A valid IP address

Default Value: 127.0.0.1


incoming_port

Description: This is the local network port number associated with the TCP listener for incoming VTS requests - required

Possible Values: A valid port number

Default Value: 2001


outgoing_host

Description: This is the local IP address of the VTS listener for outgoing requests - required

Possible Values: A valid IP address

Default Value: 127.0.0.1


outgoing_port

Description: This is the local network port number associated with the VTS listener for outgoing requests - required

Possible Values: A valid port number

Default Value: 2002


receive_timeout

Description: This is timeout in seconds before idle socket connections are closed

Possible Values: integer

Default Value: 5 seconds


session_timeout

Description: close idle session after this amount of seconds

Possible Values: integer

Default Value: 300 seconds


backup_dir

Description: This saves audio files to the configured directory

Possible Values: e.g. C:\VoiceTrust\Audio Collector\Audio\

Default Value: to empty (""), no audio is saved to disk


backup_single_file

Description: This generates one audio file per session

Possible Values: true / false

Default Value: false


thread_count

Description: This represents number of threads to run in parallel

Possible Values: this may vary from 1 to 32. Recommended value: thread_count = current number of CPU cores

Default Value: when not set, default to number of threads that the hardware is capable of executing concurrently based on the number of CPU cores and hyper-threading units